BrickEngineer: LEGO Design

LEGO Engineering for LEGO NXT and Robot Enthusiasts

Meta-Parts: Part III


This is a continuation from Meta-Parts: Part I and Part II and consists of a library of LEGO constructs that can in many cases act as liftarms for bracing various structures. Here we consider constructs made from the LEGO axle joiner perpendicular.

Axle Joiner Perpendicular Constructs I
These LEGO constructs are even more sturdy and can be used as extremely strong braces. These are especially good for LEGO Mindstorms NXT projects.

Axle Joiner Perpendicular Meta-Parts

Axle Joiner Perpendicular Constructs II
This figure shows the wide array of constructs that can be made with both the axle joiner perpendicular pieces. These pieces are constructed from either two or three of these joiners. An example showing seven of them is below. The number of combinations is staggering.

Axle Joiner Perpendicular Meta-Parts

I have found such LEGO constructs to be especially useful in robotics applications.

Meta-Parts: Part II

This is a continuation from Meta-Parts: Part I and consists of a library of LEGO constructs that can in many cases act as liftarms for bracing various structures. Note that these LEGO designs can easily pull apart when you apply forces in certain directions—usually within the plane of their design. They will not be stable for constructions requiring that they withstand forces in those directions. However, if you need to brace against forces that are directed out-of-plane, or to prevent torsion (twisting). These constructs may help. If you are desperate, and are willing to sacrifice purity, a drop of superglue will do wonders.

Planar Constructs
This is a strange set where the construct has round holes that lie in a plane. Some of these constructs are quite strong, but the next set is even stronger still.  These construct provide alternative ways to stabilize axles.

Planar Meta Parts

Rectangular Constructs
The following rectangular constructs are typically much stronger than the previous constructs. These examples sport round holes at either the corners of the side centers.

Rectangular Meta-Parts

Square Constructs
These squares are quite sturdy, and can be constructed to have a good number of round holes in the square interior. The constructs in the lower row enable one to firmly attach two beams at 90 degree angles to create cross shapes.

Square Meta-Parts

Intelligent Instruments

Intelligent Robotic Arm

The LEGO Mindstorm NXT robotics system is an excellent testbed for research in machine learning and artificial intelligence.  At Knuthlab Robotics at the University at Albany, we are developing intelligent instruments using LEGOs.

Our first instrument is a robotic arm that is designed to locate a characterize a white circle on a black background using the LEGO light sensor.  It relies on Bayesian inference, which is implemented using a technique called Nested Sampling, which was developed by John Skilling.  This software allows the robot to learn the characteristics of the circle using the light sensor data that it has collected.  The real advance here is the inquiry engine, which uses Bayesian adaptive exploration to decide which measurements to take next.  It does this by considering all the possible measurements that it could take, and computes the expected gain in information from each possible measurement.  It then chooses to take the measurement with the greatest expected information gain.  The process then repeats as the robot learns about the circle.

The system is easily generalized to solving other problems, such as exploring rooms, interpreting people’s emotions, and doing real science.

We recently presented our research at the MaxEnt 2007 workshop in Saratoga Springs NY.  Below are links to a video of the talk, my slides, and our research paper.

Video: Designing Intelligent Instruments, K.H. Knuth

Slides: Designing Intelligent Instruments, K.H. Knuth

Research Paper:
Knuth K.H., Erner P.M., Frasso S. 2007. Designing intelligent instruments. K.H. Knuth, A. Caticha, J.L. Center, A. Giffin, C.C. Rodriguez (eds.), Bayesian Inference and Maximum Entropy Methods in Science and Engineering, Saratoga Springs, NY, USA, 2007, AIP Conference Proceedings 954, American Institute of Physics, Melville NY, In press.

Meta-Parts: Part I

LEGO Technic Liftarms can be very useful for bracing structures. In these cases these L-shaped pieces are often used heavily. Many times, however, they are either the wrong size or shape for the job or you just don’t have enough pieces. One alternative is to create similar structures from smaller parts.

Complex structures are almost always constructed hierarchically. Small parts are combined to create more complex medium-sized parts. Medium-sized parts are combined to create even more complex larger parts. To help speed up the process, it often helps to have a library of small useful constructs.
Think of these as META-PARTS.

Here we present a library of constructs that can in many cases act as liftarms for bracing various structures. Note that these designs can easily pull apart when you apply forces in certain directions—usually within the plane of their design. They will not be stable for constructions requiring that they withstand forces in those directions. However, if you need to brace against forces that are directed out-of-plane, or to prevent torsion (twisting). These constructs may help. If you are desperate, and are willing to sacrifice purity, a drop of superglue will do wonders.

The Concepts
There are three L-shaped pieces that LEGO produces: 2 x 4 L-shaped Liftarm, 3 x 5 L-shaped Liftarm, and the 3 x 3 L-shaped Liftarm Thin. These are shown in the top row of the figure below.

Alternate Liftarms

One can construct pieces that act like the L-shaped liftarms, although they have only two holes. Two such constructs can be seen in the bottom row of the figure above. These pieces can easily come apart if pulled in the right direction, so some considerations must be made as to whether they are appropriate. They are also not quite as stable as the liftarms (although in desperate situations, where precision and permanence is required, some superglue would take care of both problems).

Below, is a library of LEGO Meta-Parts. Clearly, some will be more useful than others. This library is in no way exhaustive, as there are very many ways to combine parts. For an interesting discussion on the number of ways to combine 2 x 4 LEGO bricks consult:

“On the Entropy of LEGO (TM)” by Bergfinnur Durhuus and Soren Eilers, 2005, arXiv:math/054039v2″

L-Shaped Constructs
Here are five L-shaped constructs: 2 x 3 , 3 x 3 , and 4 x 4.
Note that the ends of the 4 x 4 L-shaped construct can be replaced by the Technic Connector with cross hole (the blue pieces elsewhere in this figure). These pieces can also be extended as long as you wish by adding the 180 degree Technic Angle Connector #2.

L-shaped Meta-Parts

T-Shaped Constructs
Here are five T-shaped constructs. Because the two on the top row (and the one on the bottom left) use an axle pin, they can twist, which may make them unsuitable for some applications. As you can see from the example on the bottom right, this is just the construct on the top left with the Technic Angle Connector #2 inserted.

T-shaped Meta-Parts

S, U, W -Shaped Constructs
Here is a set of constructs that are shaped like the letters S, U, and W. The ones with two pin Axle Joiners are typically a little more wobbly than the others.

S U W Shaped Constructs

The next installment will describe other meta-parts.

Content Protected Using Blog Protector By: PcDrome.